Our TURBO RS1 sets a CYCLONE WORLD RECORD! So SKETCHY!

Joylandi 12-Yan, 2021
YEAH BABY!
Buy from Rocky Mountain: bit.ly/2ChVhU4
Buy parts: www.sxsblogparts.com/
Support us: www.patreon.com/SXSBlog
Buy merch: sxsblog.com/shop/

Fikrlar

  • Think you can beat us!? BRING IT!

    • @Viking ahah that’s too funny man

    • I think it has to do with how well you feathered the throttle.. It lifts up when you try to give it the beans a little too much all at once.. When you walk your speed up a little slower, it seems to stay down better. (edit)--- evidently you already came to this conclusion. lol

    • I think you guys should put smaller tires on it and try it again it would keep you lower to the ground less tippy

    • cboystv did better

    • Hell yeah brother

  • Was wztching you guys yezterday and my daughters first words RICH RULES THANKS GUY WAS NOT DADDY BUT RICH RULES REALLY

  • Try the other way

  • Puts some bricks on one side, then you will be able to spin so much faster without tipping.

  • How did the McDonald’s boxes not fly out

  • It made me dizzy just watching!

  • I came for the Math Lesson, cool stuff. Keep up the good work y'all.

  • Outriggers with small wheels and you good for way more

  • CUSTOM OFFSETS CUSTOM OFFSETS

  • THATS FUCKIN SCIENCE

  • wouldn’t this starve the motor of oil?

  • Wow that is so sick and possibly dangerous for all concerned. Just please stay safe ! Getting hurt or worse is not worth it

  • I have the same helmet

  • Since CoG is a factor, maybe running a center seated rig with spacered wheels isn’t enough.. maybe a SxS spun counter clockwise will give you the central mass you’re looking for? 64” wide and a mass rotation at the far left might then give you a stable spin?

  • Spacers maybe? Widen the wheelbase?

    • Literally wrote this 3 seconds before he asked if there were more spacers in the shop

  • It's not the Carolina lean. It's the Palatka look. That's what we called it in Florida and everyone that had a decent truck did it to there trucks. Why would you do it in the first place. What is t advantage of lowering the rear-end like that???

  • Get Rick to donit he is LIGHTER

  • Lol slow down your wheel speed and eas into the faster spweds

  • It’s because there is no flex.

  • Hey guys. Why didn’t you just make 4 solid steal bars as shocks. Then you can drop it on its guts. Then you wouldn’t have any problems.

  • But it's not a side by side though,just a single seat

  • You are experiencing the gyroid moment of the rotational momentum. As your rotational speed increases the tendency of the forward most center of gravity begins to move upwards. It leads to gyroscopic procession, as you rotate faster and faster, the procession of the spin (wobble) shifts your CG upwards, then outwards, then you get the wheel lift. The spin will either stabilize at a certain rpm or it will eventually result in the vehicle flipping onto its side.

  • Ya, blow on the burning filter, Neanderthal......

  • m.facebook.com/story.php?story_fbid=10225497813895926&id=1343651949

  • The choke is not working take the breather off and blip the throttle linkage while lightly trying close the choke. Super flooded why the filter burnt.

  • Cool.............

  • Dude spun so fast his headlight went out

  • On next weeks episode: new valves and pistons for the 4x4

  • The engine starts to work as a gyroscope as you rev faster while spinning.

  • I’ve done it in a truck before but the only difference is the truck sucked itself down once we picked up speed lol

  • Lmao that cyclone shit was fkin insane dude.. with the whole rachet strapping and even adding wheel spacers to widen the stance out more to prevent wheels lifting up..I would of thought the ice would've been better for them but seems like the ground gave it some extra grip. It's hilarious that he's not ready to commit to another round just yet.. hahahahahaha I was willing to bet in that same machine that I could probably do just as many rpm's.. loved the video guys!🤘🤘🤘🤘🤘

  • I think y’all might need to build some barriers around the fire hydrant Why not weight the inside wheels on it for a lil more stability to keep the inside from lifting

  • That looked equivalent to or exceeded the Max-D Cyclones

  • Ya need a cheep lil airhorn! Nice work guys

  • At 30.54 is that a sasquatch of a dinger on the Dry- erase board? LMMFAO

  • The inertia of the drive shafts want to lift the left side of the car, if you rotate the other direction, flooring it will keep it down

  • 19:30 is what you’re here for

  • 1.21 gigawatts

  • Efecto giroscopio ..

  • Camber the outside tires in at the top, inside tires out at the top.. add some toe to the left front and bleed down the air on the inside tires by about 25%, balloon the outside tires. If you really want to stabilize it.. add some spring rate to the right side, a little more to the right rear. We race dirt cars.. I could make this thing a lot more stable.. Also if you add black side panels to obstruct the drivers view to where he can just see out of the windshield it'll help reduce the vertigo.

  • You guys look like you eat McDonald’s once a day

  • This video made me laugh hard! Haha

  • Keep the wheel speed slower and closer to the traction point and they won't want to come up so much

  • The math you did was real simple yet real difficult 👍

  • So funny, I didn't know about wrist restraints until I saw Cleetus running Leroy. Pro-Tip: Look into LiPo batteries...way more stable for long term storage, almost like a deep cycle. Don't have to put it on a tender, either. Have one on my VFR. Didn't start it for 6+ months and fired up first time like a champ.

    • @SXSBlog.com Aaah, all good, fair point. 👍 Keep up the awesome vids!

    • We have one in 2JP but don’t care enough to spend big money on the CF1

  • Where are you guys located?

  • I don’t know how Polaris suckers people into buying their garbage

  • It seems like it’s lifting so quick because the suspension can’t actually travel down.

  • I did 102rpmin my side by side

  • At 12mins i seen advacare i use 2 work with them What state u in

  • U have to talk to Farm truck and AZN ......you guys are EPIC!

  • Too much weight in the bac.....think about it.....weight the front. No vertical take off

  • Guys,,,, i watched this as soon as you came out with it!!! I have seen 4 different vids with others challenging you.... NOT EVEN CLOSE!!!! Lmao!!! You guys set the bars buds!!!!

  • I'll drive it..

  • C-boys clocked you guys lol they deff got over 100 on theres

    • @SXSBlog.com oh no shit. I thought they said they had you beat at atleast 100.they will try again I'm sure

    • Nah, there’s was 82 rpm fam. Real good rip though!

  • Cboys tv beat u

  • Maybe adj the ing Tim advance it few degrees A

  • Lower is always better for the driver

  • Why not just get your buddy's to climb on then tie. It off

  • Sous " 8 inches in the rear? Crazy! " Lol

  • Dude you should really wear a Hans device too thats very fast and if u roll and get whip lash u could end up like Earnhardt!!

  • This has to be my favorite video yet😂😂😂😂

  • How many rpm's was Ben from the chops

  • He hit 88 saw a glimpse of the other dimension had to slow down.

  • just get shorter shocks

  • Cboys got the win for sure

  • Gyroscopic anti gravity effects??? Fit lighter inner tires so they have less lift.

  • Come to find out they are recording in 30fps 😲

  • That lift is because the wheels are so big, they have a gyroscope effect. Smaller wheels or lower wheel speed are the only ways to effectively counter that but it definitely is fun to watch! 😁

  • Nick reminds me of someone I’ve seen in movies. Seems super funny to be around

  • Remove spacers, camber it

  • 10:34 NICKS FACE 🤣🤣🤣🤣

  • Nice fridge

  • Cboys beat yall

  • What kind of battery do you guys recommend for a RZR? I need to order one soon. Thanks for the videos I've been watching you guys from the start.

  • What I learned from this video, if I ever get a thirsty carbureted vehicle and it sits for any length of time, take the air cleaner off before firing it up so any backfire doesn't toast the filter. Now I know why all the revival people take the air cleaner off... well besides shoving brake clean down the gullet.

  • Burgers in the top still got me laughing hahahaha

  • I was Laughing so hard It Pissed my cat off and he swatted me..... LOL.

  • cboys just did this

  • Its not wierd the rear is lifting due to weighing more and being thrown in a cirxle so fast.

  • I think you need to be going by G forces NASA stuff

  • that was lit!!! it made me dizzy🤢🤢🤢🤢🤢🤢

  • no Cboy

  • I think you need to do it again but set up the GoPro in front of the cluster to see how fast you're getting up to

  • I don't know it's hard to say the Cboystv cyclone looked pretty fast also

  • Cboys already went faster then you on there first try

  • You need to deflate the front tire pivoting would be easier

  • Cboys did it better

  • @cboystv has yhall beaten no doubt

    • They let er rip but still 15 rpm short!

  • Look at white board 31:11

  • @cboystv beat u

    • Theirs was awesome but only 82 rpm, maybe they'll give er another shot!?

  • What’s up with the McDonald’s? On the rs1

  • The C Boys might challenge you

    • Hopefully! Looking for some more participants!

  • Just subbed, love this content!

  • Great work! I would have puked for sure lol

  • 9:33 always wants to be in front of the camers

  • Hey y’all 1,000th comment here

  • Maybe some weight on that inner side would help

  • the CBOYSTV did with a maverick x3 and it looked faster

    • CBoys was bad ass but not quite as fast, they went 82 rpm. I think we'll see more soon though!

  • I laughed too hard.